Conduit & Conduit Fittings
3/4", 90 Degree, Non-Metallic Liquid Tight Connector, 1 Piece Body Requires No Disassembly Of Components For Installation, So Strong There Is No Need For A Compression Nut, PVC Construction Of The Fitting & Locknut Provides Unparalleled Protection From Water, Oil & Dust.
1" Water Tight Cable Connector, For Service Entrance Cable Type 3#4, Use To Seal & Terminate Oval Type SE Or Type SEU Cable To A Threaded Entry Of A Watertight Enclosure.
2" Water Tight Cable Connector, For Service Entrance Cable Type 3#4/0, Use To Seal & Terminate Oval Type SE Or Type Seu Cable To A Threaded Entry Of A Watertight Enclosure.
3/4" Electrical Metallic Tubing Inside Corner Pull Elbow. Die Cast Zinc. Use To Facilitate Pulling Conductors Through A Sharp Bend In A Run Of Electrical Metallic Tubing In Dry Locations Where Obstructions Limit The Space Beyond The Connecor Such As Inside A Corner.
1/2" Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or IMC Conduit, UL Listed. UPC Polybag. UPC Polybag.
3/4" Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or IMC Conduit, UL Listed. UPC Polybag.
1" Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or IMC Conduit, UL Listed.
1/2" 90 Degree Rigid Conduit Elbow, Galvanized Steel, Use To Make A 90 Degree Change Of Direction In A Run Of Rigid Or IMC Conduit.
3/4" 90 Degree Rigid Conduit Elbow, Galvanized Steel, Use To Make A 90 Degree change of direction in A Run Of Rigid Or IMC Conduit.
1" 90 Degree Rigid Conduit Elbow, Galvanized Steel, Use To Make A 90 Degree change Of Direction In A Run Of Rigid Or IMC Conduit.
2" Insulated Metallic Grounding Bushing, Tin Plated Open Type Lug, Dual Rated For CU-AL Conductors, Thermoplastic Liners Rated 105 Degrees Celsius, Die Cast Zinc, Used To Provide A Smooth, WellRounded Bearing Surface For Wire Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The NEC, Lay-In Type Lug Provides For Easy Attachment Of A Grounding Conductor, UL & CSA Approved.
1/2", Bronze, High Strength Ground Rod Clamp, High Strength, #10 Solid, #2 Stranded, Suitable For Direct Burial, Bagged.
5/8", Bronze, High Strength Ground Rod Clamp, Wire Range #10 Solid, #2 Stranded, Suitable For Direct Burial, Bagged.
Bronze, Direct Burial Lay In Ground Clamp, 1/2" - 1" Pipe Range, 3/8" - 1" Rebar Range, 1/4" - 1" Ground Rod Range, #10 Solid, #2 Stranded, Mechanical Connection /Splice Two #8 Solid.
1/2" - 1", Brass, Heavy Duty Ground Clamp, #10 Solid, #2 Stranded, Bagged.